You are using an old browser that may not function as expected. For a better, safer browsing experience, please upgrade your browser.

Log in Become a Member

Depth Filtration

See under Filtration.

Physical-mechanical process (also filtration, filtering and filtering) for the separation or purification of substances such as liquids or gases by means of technical filtering devices. Various filtration procedures are a common process in winemaking. Already in ancient times the Egyptians, Sumerians and Romans used a technique in which wine was filtered by means of cloths or similar material. In the Middle Ages, a piece of cloth made of muslin acting as a filter was used to filter the added aromatic spices out of the wine. This piece of cloth was called "Manica Hippocratis" (Hippocratic sleeve).

In today's viticulture, filtration mainly concerns grape must and young wine, but also air and water for disinfection purposes. The purpose of this process is to remove undesirable substances and thus stabilise or sterilise the grape must or wine. Usually this is done in several steps. First of all, the rather large turbidity substances (pulp) produced during pressing are removed from the must (see also degumming and clarification). Only then is the so-called filter maturity of the wine achieved as a prerequisite for the respective filtration method. This means that the wine must not be too cloudy. A subsequent step is the removal of microorganisms such as yeasts and bacteria.

However, filters not only retain those particles that (as one might assume) are larger than the filter pore size. This is only one of the effects. Other mechanisms are particle inertia, diffusion effects (thermal movement of particles), electrostatics with adsorptive effect or barrier effect. Therefore, particles are generally also separated that are far smaller than the pore size of the filter. In any case, filter pore sizes with ≤ 1 µm (millionth of a meter) are required (human hair approx. 40 µm).

Filtration can be carried out several times at different stages of winemaking, especially after pressing (must), after fermentation and immediately before or during bottling. As a rule, several of the processes listed below are also carried out in combination. Filtration, however, always means a more or less strong mechanical stress on the wine, there can also be (too high) losses of aromatic substances or carbonic acid, therefore this method should be used carefully. Improper or too sharp application can lead to filter shock. Many producers therefore largely...

The world's largest Lexikon of wine terms.

24.938 Keywords · 47.560 Synonyms · 5.307 Translations · 30.250 Pronunciations · 166.163 Cross-references
made with by our Experts. About the Lexicon