Roasting

See under .

The process now used worldwide in the production of barrique barrels was allegedly "invented" by chance in France. Wine producers near the sea (also) used herring barrels from fishermen and tried to remove the undesirable fish odour in the wood by brushing or planing it out. When this did not lead to a satisfactory result, the barrels were burnt out on the inside. Today, this is known as toasting or barrel branding of the inner barrel walls of barrique barrels. As a rule, the two barrel bottoms are usually not toasted, as this is very time-consuming. However, this also depends on the barrique manufacturer or the customer's (winemaker's) wishes.

Production process

Toasting takes place, for example, over an open oak fire, using a gas burner or, more recently, with infrared heat. This achieves a heat of 200 to 250 °Celsius. The duration and intensity of the fire determine the degree of toasting: 10 to 15 minutes for wines, 15 to 20 minutes for spirits (cognac, rum, whisky, etc.). A very strong toasting causes charring and is therefore referred to as charring. The wood is...

Full text

Voices of our members

In the past, you needed a wealth of encyclopaedias and specialist literature to keep up to date in your vinophile professional life. Today, Wine lexicon from wein.plus is one of my best helpers and can rightly be called the "bible of wine knowledge".
Prof. Dr. Walter Kutscher
Lehrgangsleiter Sommelierausbildung WIFI-Wien

Welcome back!

Roasting

Toasting

Production process

Voices of our members

The world's largest Lexicon of wine terms.

EVENTS NEAR YOU